Setting up the Datatime Range

Most of the time range of the basic data object must be set.

<Figure 1> is comes up, when you insert basic data object or select the time range tab at setting dialogue box.

You can set the Time divsion, Start/End time range of Minute, Hour, Day, Month etc, at <Figure 1>.

'Set Hour, Day, Month, Year' which is displayed at start/end time editor mean the standard time which is set at Config Report Datetime dialogue box.

<Figure 1> Example of datatime setting dialogue box

You can set the time range by using the button, at datatime setting dialogue box such as <Table 1> format.

In datatime setting edit box, forward button means start/end time large unit, backward one means start/end time small unit.

Example of designated day setting) Forward(large unit) button increase/decrease as day unit, backward(small unit) button increase/decrease as hour unit.

Example of designated month setting) Forward(large unit) button increase/decrease as month unit, backward(small unit) button increase/decrease as day unit.

Also, if you check  the (V) of <Figure 1>, you can set the time 'to MM/DD/HH'.

Notice) If you check the  ( V ), it uses the end time of 'Set Hour/Day/Month/Year', as reporter view time.

     But, data object of multiple lines and instantaneous value doesn't use 'to MM/DD/HH'.

If you select the time division of <Figure 1>, the format of time is displayed at start/end time editor, such as <Table 1>.

                    <Table 1> Display format for start/end time according to time division

Setting up the Print Time

Basic Data

Insert menu in Reporter Editor

Reporter Editor Main Help